Skip to main content

Through LoadRunner Windows Resource Monitoring and Check Memory Leak

Windows Resource Monitoring

The Windows Resources monitor shows the Windows resources measured
during the scenario. Windows measurements correspond to the built-in
counters available from the Windows Performance Monitor.
Note: To monitor a Windows machine over a firewall, use TCP, port .
This chapter includes:
➤ Setting up the Monitoring Environment on page 
➤ Adding a Machine to Monitor on page 
➤ Configuring the Windows Resources Monitor on page 
➤ Windows Resource Performance Counters on page 

Setting up the Monitoring Environment
➤ If you are using the SiteScope monitor engine, ensure that SiteScope has
been installed on a server. You can install SiteScope on the same server as
the Controller, or on a dedicated server.
➤ If you want to monitor a remote Windows server that does not use Windows
domain security, you must authenticate the Controller on the remote
Windows server. To authenticate the Controller, create an account, or
change the password of the account used to log on to the Controller so that
it matches the password and user name used to log on to the remote
monitored Windows machine. When the remote Windows machine
requests another machine’s resources, it sends the logged-in user name and
password of the machine requesting the resources.
Adding a Machine to Monitor
In order to monitor the Windows resources of a particular machine from the
Controller, you need to add the machine and the measurements that you
want to monitor.
To add a machine to the Controller:
1 Click the Windows Resources graph in the graph tree, and drag it into the
right pane of the Run view.
2 Right-click the graph and select Add Measurements, or click anywhere on
the graph and choose Monitors > Add Measurements. The Windows
Resources dialog box opens.
3 By default, LoadRunner monitors Windows resources using the native
LoadRunner monitor engine.
If you want to monitor Windows resources using the SiteScope monitor
engine, click Advanced.
In the Choose Monitor Engine dialog box, choose SiteScope, and click OK
to close the Monitor Engine dialog box.

4 In the Monitored Server Machines section, click Add.
The Add Machine dialog box opens.
➤ In the Monitored Machine Information section, enter the server name or
IP address of the machine you want to monitor. Select the platform on
which the machine runs.
➤ In the SiteScope Server Information section, enter the SiteScope machine
name, and port (default: 8888), and specify whether you are using a
Secure HTTP connection. If you are using a SiteScope account, fill in the
relevant account information.
Note: If you are adding a native LoadRunner monitor, the SiteScope
Server Information section does not appear.
Click OK to close the Add Machine dialog box.
5 Click Add in the Resource Measurements on: <machine> section of the
Windows Resources dialog box.
6 Continue with “Configuring the Windows Resources Monitor” on page .
Configuring the Windows Resources Monitor
The configuration for this monitor differs slightly depending on whether
you are adding a native LoadRunner or SiteScope monitor.
This section describes:
➤ Configuring the Native LoadRunner Windows Resources Monitor
➤ Configuring the SiteScope Windows Resources Monitor
Configuring the Native LoadRunner Windows Resources
Monitor
1 When you add a machine in the Windows Resources dialog box, the default
measurements are displayed in the Resource Measurements on: <machine>
section.

Note: To change the default counters for the Windows machine monitor,
see “Changing a Monitor’s Default Counters” .
➤ To delete a measurement from the default list, select the measurement
and click Delete.
➤ To select additional measurements, click Add.
2 A Windows Resources dialog box opens displaying the available Windows
resources.
For each measurement select an object, counter, and instance, as described
in “Understanding the Add Windows Resources Measurements Dialog Box”, and then click Add.
For a description of the available measurements, see “Windows Resource
Performance Counters” 
3 When you have finished selecting the measurements to monitor, click
Close. The counters that you selected appear in the Resource Measurements
on: <machine> section of the Windows Resources dialog box.
4 Click OK in the Windows Resources dialog box to activate the monitor.
Configuring the SiteScope Windows Resources Monitor
The first time you add measurements you need to configure the remote
machine properties. When you click Add in the Resource Measurements on:
<machine> section of the Windows Resources dialog box, the Configuring
NT Remote Machine dialog box opens.
To configure a SiteScope Windows Resources monitor:
1 Enter the remote machine’s configuration information, as described in
“Understanding the Configuring NT Remote Machine Dialog Box” , and click OK.
2 The Configuring PDH Monitor dialog box opens. Verify the Server and
Update every properties, and click OK.
3 The Add Windows Resources Measurements dialog box opens displaying the
available measurements and server properties.













For each measurement select an object, measurement, and instance, as
described in “Understanding the Add Windows Resources Measurements
Dialog Box” on page 68, and then click Add.
For a description of the available measurements, see “Windows Resource
Performance Counters” .
Note: To change the default counters for the Windows machine monitor,
see “Changing a Monitor’s Default Counters” on page 395.
4 When you have finished selecting the measurements to monitor, click
Close. The measurements that you selected appear in the Resource
Measurements on: <machine> section of the Windows Resources dialog box.
5 Click OK in the Windows Resources dialog box to activate the monitor.
Understanding the Add Windows Resources
Measurements Dialog Box
The Add Windows Resources Measurements dialog box lets you select the
Windows resources to monitor. The Windows resources correspond to the
built-in counters available from the Windows Performance Monitor.
➤ Object. Select the object to monitor on the specified Windows machine.
➤ Counters/Measurements. Select the resource counter/measurement to
monitor. Select multiple counters using the CTRL key. For an explanation of
each counter, click Explain.
➤ Instances. If multiple instances of the selected counter are running, select
one or more instances to monitor for the selected counter.
➤ Explain. Displays a description of the selected counter.







Comments

Popular posts from this blog

Why Driven Testing Important for every Software Tester

Context driven testing, Tester have to set their own path to complete their testing objectives, Test product, test documentation and test deliverable. The meaning of context-driven testing is project capture application of skill and opinion. Tester start testing with context driven testing it is very easy to understand and test application, therefore testing is a human activity that involves a great deal of skill to do well. The context-driven software testing methodological analysis indicates for continuous and creative valuation of testing opportunities. A tester always wants to do testing with context driven testing. It’s a very good practice to hands of explore and able to be proud of that work.   Why we need context driven testing- Context driven methodology like as agile process. Agile methodology generally depends on all-inclusive of unit tests. But in context driven testing, tester have to knowledge on unit testing as well testers will change, In context driven te...

Want to know about Mobile Application Testing? Came to right place

What is Mobile Application Testing ? Mobile Application Testing is a phenomenon of testing functionality, usability and consistency of application software designed for mobiles. It is done in two ways: Automated and Manually. When you buy a new mobile, various applications came pre-installed and some you install as per your need from mobile software distribution platforms such as Google Play, Nokia Store etc. In the recent years, mobile devices had shown a rapid growth rate .  Factors that give an open challenge to Mobile application Testing : 1. Mobile devices models : Different models have different hardware configurations, input methods (some are QWERTY, some are touch while others are normal). 2. Several different operating systems (OS) : Market  is full of availability of different operating  systems  (   Android , IOS, BREW, BREWMP, Symbian,   Windows Phone , and   BlackBerry   (RIM)).Each operating system is unique in ...

SELENIUM TESTING: SELENIUM IDE (& its installation)

In our previous post of selenium testing, we discussed selenium testing briefly. But it was just an introduction about that. And the selenium is much wider in its own. In today’s article, we are going to discuss the selenium, IDE Tool. What is Selenium IDE?? In selenium testing, selenium IDE (Selenium Integrated Development Environment) is a simple tool present in selenium suite Selenium IDE has an inbuilt record and playback functionality that allow us to create tests very quickly, easily and efficiently. Selenium IDE is very easy to install and use. As selenium IDE is a Firefox plugin, it aims to support Firefox browser only. Therefore, we can execute our created test scripts on Firefox only. Selenium IDE supports auto complete mode which allows the user to: * Enter commands more quickly *Restricts the user to enter invalid commands. The most impressive thing about the Selenium IDE in selenium testing that the user need not to have any prior knowledge of pr...